BMW 507

Welcome (or welcome back, as some of you recently unsubscribed/subscribed again to this blog and I have to admit that I've lost track of some of you) to escala43, A.Sivianes, rosslann and Totò. Enjoy your visit(s) here!

A little history

The BMW 507 was another idea from the man who single-handedly made the small Volkswagen Beetle a huge yet unexpected success in America: Max Hoffmann. BMW having nothing more to offer in the U.S. than its baroque 501 and 502 models during the early Fifties, Hoffmann insistently requested a more appealing model for this particular market. BMW had increasing financial difficulties at the time and finally accepted, seeing its salvation in the potential American sales. The Bavarian company answered the call with not just one, but two new models: the elegant 503 coupe and convertible, and the striking 507 roadster. Both cars had been penned by Albrecht von Goertz.

Apart from its stylish body, the 507 tried to make good use of as many parts as possible from the existing BMW models, in order to keep production costs relatively low. Still, it was deemed necessary to enlarge the 2.6-litre light-alloy V8 engine on hand to 3.2-litre in order to reach the level of performance expected from such a car. Fed by two Solex carburettors, it was rated at 150 hp, propelling the 507 at 200 kph.

Alas, despite all the efforts from BMW’s engineers, the cost per unit of this wonderful automobile somehow got out of control. Mainly made from aluminium and other light alloys, the 507, which body was entirely hand-formed, would ultimately sell for about twice its intended price… A commercial success was hard to forecast and, though the car was an excellent image-builder, providing BMW still needed one, its maker could not afford more financial loses. Introduced in 1955, produced from 1956, the 507 retired three years later, simultaneously with its cousin the 503. Their combined production did not exceed a few hundred copies, which did nothing for the company but aggravating its problems. In the end, BMW was not saved by these supercars, but by their exact opposite, as the company started to produce under licence the tiny Isetta, the Italian bubble car.

About the models

Model: BMW 507
Year: 1955
Maker: Motor Max
Scale: 1/24
Distributed by: Motor Max
Acquired: brand new, in December 2005, in Manila, Philippines

Simple, even perhaps crude as Motor Max knows as to produce die-casts, but this time at least, it’s quite well assembled. One last remark: the windshield appears somewhat tall. My rating is 11/20.

















Model: BMW 507
Year: 1956
Maker: New Ray
Scale: 1/43
Distributed by: New Ray, "Auto Model Kit" series
Acquired: brand new, in September 2003, in Manila, Philippines

New Ray also proposes this model, as poor as usual: 8/20.









Model: BMW 507
Year: 1957
Maker: Del Prado, or whoever builds models for Del Prado
Scale: 1/43
Distributed by: M-Smart
Acquired: brand new, in February 2007, in Shenzhen, China

Finally, this die-cast has been offered by M-Smart, which actually got its hands on a stock on unsold Del Prado press models. And guess what? It is very well made for the price, accurate and fitted with good-looking wheels - only the headlights could have been much better. It deserves a 12/20.

Ford Crown Victoria

Quite discreetly, Ford has recently pulled the plug on the very last of the “real” American cars, when the final Ford Crown Victoria left the assembly line. So more than a simple post, here is an homage of sorts to an era now over.

A little history

To say the truth, even when the Ford Crown Victoria and its rival the Chevrolet Caprice appeared twenty years ago, there were doubts about the future of these huge dinosaurs, still built with separate frames and fitted with transmissions to the rear wheels. Somehow, they succeeded in surviving longer than many may have thought, thanks to the faithfulness of many Floridian or Californian seniors, who have never driven anything else than this type of cars for their whole lives, but whose market was getting smaller year after year; and even more significantly due to the high demand from law enforcement agencies and taxicab operators.

In March 1991, both the Ford Crown Victoria, which dropped at this point its traditional “LTD” name, and its fancier counterpart the Mercury Grand Marquis received a brand new body, more rounded and aerodynamic than their dated predecessors, but still based on the “Panther” chassis used for full-size sedans since the late Seventies. This followed a similar move by General Motors, which had just updated its line of full-size models – Chevrolet Caprice, Oldsmobile Custom Cruiser and Buick Roadmaster, and the earlier introduction of Ford’s luxury model, the Lincoln Town Car, also based on the Panther platform. Despite its older underpinnings, the Crown Victoria enjoyed a brand new 4.6-litre “modular” engine, and optional ABS and traction-control systems. Its styling was an apt balance of modern and conservative, and this proved perfect as the bathtub-like body of the Caprice had been poorly received. Within months, the Crown Victoria led the market well ahead of its GMC rival which, after a botched restyling, disappeared following the 1996 model year. From then on, the Crown Vic’ became the only option for a traditional V8 automobile in its price range.

For the 1998 model year, the styling of the Crown Victoria was largely revised, and the car benefited from an improved suspension. While the general public was less and less attracted by the heavy car, it was still hugely popular with policemen – to whom Ford proposed the Crown Victoria Police Interceptor version – and taxi drivers. It also enjoyed a healthy following in the Middle East, which actually had soon become its only export market. At the end of the 2007 model year, the Crown Victoria stopped being available to private buyers in America, those being redirected towards the Mercury Grand Marquis, and remained only available for fleets and export markets.

In 2008, Ford decided to concentrate the production of all its Panther-based cars in its St. Thomas plant. The Canadian unions were rather anxious about the future of the car, or more specifically those of thousands of workers at this Ontario factory. Ford reassured them by announcing that large amounts of money would be invested to update the car. This was nothing but a lie. The last Mercury Grand Marquis was produced in January 2011, the brand being discontinued. It was followed by the last Lincoln Town Car in August, the car not being in conformity with new safety regulations imposed by Washington on all cars built for model year 2012. Though the Ford Crown Victoria was also affected by these new rules, it was maintained in production until September to fulfil foreign orders. On September 15, 2011, the very last Crown Vic’ left the assembly line of a factory due to close.

About the models

Model: Ford Crown Victoria Police Interceptor
Year: c.1997
Maker: Motor Max
Scale: 1/18
Distributed by: Motor Max, ref. 73125
Acquired: brand new, in February 2005, in Manila, Philippines

A nice surprise among Motor Max range of traditionally poorly assembled and painted die-casts. Their Crown Victoria certainly isn’t outstanding, but very few reproaches can be made to it. A rare feature for a model in this price range, it offers four opening doors. My rating is 13/20.















Model: Ford Crown Victoria
Year: 1998
Maker: Ixo
Scale: 1/43
Distributed by: Altaya as no.52 of its Taxis du Monde press series
Acquired: brand new, in March 2004, in Souillac, France

Altaya could hardly avoid proposing a Crown Victoria in its series about world taxies and cabs, as the large Fords have replaced the traditional Checkers as the iconic transportation of the New Yorkers. Its die-cast has been provided to the Italian distributor by Ixo. Again the rendition of the large car is accurate enough to be worth 13/20.







Model: Ford Crown Victoria
Year: 2002
Maker: Ixo
Scale: 1/43
Distributed by: Altaya as no.70 of its Taxis du Monde press series
Acquired: brand new, in December 2004, in Souillac, France

In its pursuit for more money pocketed from its faithful customers Altaya has extended its taxi series by offering new decorations to models already proposed earlier in different forms. The Crown Victoria was one of those, being sold a second time as a Dubai taxi. Decoration is somewhat simpler than its New York’s counterpart’s, but overall level of quality still deserves a 13/20.