BMW F650

A little history

A rather elitist brand on four as well as on two wheels, BMW decided during the early Nineties to address a slightly less affluent and much younger clientele. In 1993, this willingness translated into the F650. Available in two versions, the Funduro and the ST, the F650 was powered by a single-cylinder 650cc Rotax rated at 50 hp. Both models were built until the end of 1999, when they were replaced by a single model, the F650GS. Fitted with an injection engine and a catalytic converter, the GS stood higher, yet had a lower centre of gravity thanks to a modified fuel tank.

At the end of 2007, BMW deeply updated its F650GS for the Milan motorcycle show. Since then, it has appeared as a simplified version of the new F800GS. A little odd perhaps, the F650GS actually shares its larger sister’s smoother 800cc engine. Once more provided by Rotax, it is an inline twin delivering 85 hp in F800 guise, but limited to 71 hp when fitted to the F650. Again designed for a public of bikers with limited experience, both GS models can also be restricted to a friendlier output of only 34 hp. They are still proposed by BMW today.

About the model

Model: BMW F650GS
Year: 2007
Maker: Maisto
Scale: 1/18
Distributed by: Maisto
Acquired: second hand with neither stand nor box, in December 2011, in Brive, France

A rendition of the F650GS that is well in line with what Maisto usually produces: nicely done overall but the high content of plastic parts sadly makes it look a little toy-like. My rating is 12/20.

Suzuki Hayabusa

Belated Happy New Year to you all, and welcome back!

A little history

There has been a time when a 750cc bike could be considered large and powerful. But as the Nineties dawned, announcing a struggle of huge proportions for the title of the fastest production motorcycle in the world, the big bikes of yesterday would soon be dwarfed by the modern giants.

By the late decade, the record stood in the hands of Honda, which CBR1100XX Super Blackbird could reach an astonishing 290 kph. “It’s not your father’s Honda”, to paraphrase a famous automotive slogan. That was at this moment that Suzuki entered the fray.

Admittedly, its GSX1300R wasn’t, in the early stages of its development, intended to set a world record. But from the moment it was decided to adopt a 1300cc inline-four engine, the largest block ever fitted to a sport motorcycle, the company’s engineers felt the title could be at hand. The new bike was introduced in 1999 under the name Hayabusa (“peregrine falcon”) – incidentally, this has already been the name of Japan’s most successful fighter aircraft of World War Two, the Nakajima Ki-43. With as much as 173 bhp, a rather light weight and a very sleek design, the Suzuki Hayabusa broke the symbolic 300 kph barrier and, setting a 312 kph mark, crushed its competitors.

In spite of being a remarkable machine, the Hayabusa caused controversy. First of all, the public was split over its peculiar look. Keyword during its development had been efficiency, not beauty. As it turned out, the Hayabusa announced the way most subsequent motorcycles would look like. More serious was the stir created by the escalating race between manufacturers to produce the fastest production motorcycle. Could it be really wise to let such machines roaming on open roads? Anticipating a negative reaction from the authorities of several countries, and possibly even a ban on such “hyper-sport” motorcycles, the various companies involved decided to declare a ceasefire and limit the top speed of their machines to “only” 300 kph. The Hayabusa respected the terms of this agreement from model year 2001, and was produced as such until the end of 2007, without much modification.

For model year 2008, Suzuki launched a new Hayabusa, which is actually more of an evolution of its predecessor. The controversial appearance of the first generation was by then much better accepted, so the second GSX1300R kept a similar look, though being entirely redesigned on the outside. On the mechanical side, the same engine was retained, albeit in a heavily reworked form displacing 1340cc and capable of a claimed 197 bhp. This obviously had no impact on top speed, but improved acceleration and other performances. The new Hayabusa was complemented by a new “naked bike” built around the 1340cc engine, the B-King. Production of these two models continues at time of writing.

About the model

Model: Suzuki GSX1300R-X Hayabusa
Year: 1999
Maker: Maisto
Scale: 1/18
Distributed by: Maisto
Acquired: second hand with neither stand nor box, in December 2011, in Brive, France

Excellent model among a very wide range of 1:18 motorcycles offered at quite a low cost by Maisto. This GSX1300R sports an elegant copper-silver paint scheme flanked by the traditional “Hayabusa” ideogram. My rating is 14/20.

BMW C1

A little history

With increasing traffic congestion downtown many of the world cities and growing environmental concerns, many automobile drivers started turning to scooters and even bicycles as their daily commuting vehicles during the Nineties. Experience on two wheels being rather limited for these newly converted users, fears about safety quickly arose.

One of the three constructors to be equally present on two- and four-wheel markets, BMW decided to bridge the gap between the two concepts with a revolutionary vehicle, no less. Unfortunately, it failed – most probably sometime in the future it will be seen as too much ahead of its times.

Actually, BMW was even ahead of the demand for a two-wheel city vehicle when it unveiled its C1 prototype in Cologne as early as in 1992. The C1 was, basically, a scooter, but one with… a roof.

In fact, the C1 had received more than a simple roof. Its driver would seat in a reinforced cage made of aluminium, and behind a crumple zone. He would also be protected by bars set at shoulder height, and fastened to his seat by aviation-type harnesses. The first goal of the C1 was to demonstrate superior safety standards, and it passed crash tests with flying colours, proving to be as safe as a city car. Based on these results, BMW claimed the C1 could be driven without a helmet. Another potential burden for defectors from the automobile side being operating a motorcycle transmission, BMW fitted its C1 with a CVT system which allowed for extreme ease. Furthermore, the roof offered some degree of protection against the rain.

By the late Nineties, the production C1 was finally ready and the time seemed ideal for its launch. The new scooter was powered by a 125cc mono-cylinder good for 15 hp; top speed, if this ever matters for a city vehicle, was advertised at 106 kph. Rather than producing an in-house engine, BMW purchased its blocks from Rotax, an Austrian company notably involved in ultralight aircraft. Subcontracting didn’t stop there, as actually the C1 production as a whole was entrusted to Bertone in Italy. The C1 was introduced in late 1999, and sales began early in 2000 in most European markets.

Apart from its bold design, two factors played against the C1’s commercial success. One was its price, much higher than any other rival scooter in the 125cc class. The other one was the reticence from several countries’ authorities to alter the regulations regarding the use of helmets. In the United Kingdom in particular, rigid laws virtually excluded the C1 from the country.

Despite the 2001 launch of a slightly more muscular version, named “200” but actually powered by a 17.5 hp, 175cc engine, sales were sluggish. BMW threw the towel during 2003. Did the Bavarian give up all hopes on its C1? Apparently not, as a lightened version powered by an electric motor, the C1-E, as been presented as a concept in 2009. Though the company providing its power, Vectrix, has since then filled for bankruptcy, it isn’t impossible that this pioneering BMW be resurrected one day.

About the model

Model: BMW C1
Year: 2000
Maker: Maisto
Scale: 1/18
Distributed by: Maisto, ref. 39350
Acquired: brand new, in February 2005, in Manila, Philippines

Accurate enough, though as it is common with Maisto the “chromed” parts look way too much like plastic rather than metal. My rating is 11/20.

Indian Chief

A little history

What's left to be said about the Indian Chief? It would probably appear among the half-dozen most iconic motorcycles in history, and it certainly is the most glamorous of them all. Launched in 1922, it rapidly eclipsed the Scout as the American manufacturer’s most popular product, and was built until the company’s demise, in 1953. At first it retained an improved version of the V-Twin, 1000 cc engine from the previous Powerplus model, though enlarged to 1200 cc as early as 1923. The needs of the U.S. Army during World War Two ensured that Indian’s factory was used to its full capacity, but the major part of the military contracts nevertheless went to Harley Davidson, Indian’s rising competitor. As soon as the conflict was over the gap hopelessly broadened between the two companies, putting Indian, once the biggest motorcycles manufacturer in the world, in dire straits. In 1950 the Chief’s displacement was again enlarged, to 1300 cc – to no avail. By 1953 the production was interrupted. For a time Indian confined itself to rebadging imported motorcycles, but left an open field to Harley Davidson regarding heavy V-Twin cruisers.

After an attempt to launch a modern-day Indian failed in California, a new company, owned in majority by British interests but set up in Kings Mountain, North Carolina, revived the name. An outstanding motorcycle intentionally built in very limited quantities, the latest Indian model, symbolically named Chief, was introduced for 2009. Should the third millennium Indian honour the glorious names it bears, let us wish it the best fortune may bring.

About the model

Model: Indian Chief
Year: 1948
Maker: Maisto
Scale: 1/18
Distributed by: Maisto, ref. 31313 (note: same reference was used for three different colours - red, yellow and this blue)
Acquired: second hand with stand but without box, in April 2007, in Brive, France

Maisto launched this milestone of American motor history back in 1997, and this model is unfortunately long sold out. The same company also produced a 1:10 scale version of the same motorcycle, as long as a 1:18 rendition of the smaller Indian Four. Maisto didn't provide any clue about the vintage of this Chief on its stand, but the 1:10 being presented as a 1948 model, I assume its smaller sister is from the same year. Overall the model appears nice, but on closer inspection the wire wheels are quite thick, and the typical fringed saddle looks rather simplified. Furthermore, the engine seems to be exactly what it is: two symmetrical parts of bright plastic glued together. Excellent models of the Indian Chief exist in 1:18... but not at the same price, so I suppose a few drawbacks have to be accepted. I'd give 12/20 to this model.